綜合布線時，如何對線纜長度進行估算?

綜合布線時，線纜長度估算分為有圖紙和無圖紙兩種情況：

1.有圖紙：

在圖紙上找出線路走向，確定監控位置。工程施工一般布線原則是就近走直線，盡量不繞彎。

長度估算方式：單支槍最遠距離用線長度一般按建築面積的長和寬，加監控室下線長度、前端預留線之和。

2.無圖紙：

需了解網點基本情況，如樓高、面積、線井位置等基本信息，然後根據樓層高度估算垂直長度，再根據機櫃離線井的橫向距離算出線纜大概總長度。

3.電梯布線：

如果大樓布線有電梯情況，線纜從哪層進入電梯應按：F÷2+1(F是樓層)的公式，計算出實際樓層數後再接入。

* * * * * *

創世服務有限公司是一間提供專業數據中心架設公司，擁有一群專業團隊貼心地關注客戶的要求，並提供優質的服務。

想了解更多關於「綜合布線時，如何對線纜長度進行估算?」的內容，請瀏覽創世官網：[微同城信息网提醒：谨防网络虚假兼职网赚信息！客服热线：400-088-0725]livservices.com.hk

地址: 香港觀塘鴻圖道37-39號鴻泰工業大廈4樓4室

電話：852-31063235

——————

How to estimate the cable length when wiring?

In the case of integrated wiring, cable length estimation is divided into two cases: drawing and no drawing:

1. Have drawings:

Find the route on the drawing and determine the monitoring position. The general wiring principle of engineering construction is to take a straight line and try not to bend around.

Length estimation method: The length of the longest distance of a single gun is generally the length and width of the building area, plus the length of the down line of the monitoring room and the reserved line of the front end.

2. No drawings:

It is necessary to understand the basic information of the outlets, such as the height, area, and position of the well, and then estimate the vertical length according to the height of the floor, and then calculate the approximate length of the cable according to the lateral distance of the offline well of the cabi[微同城信息网提醒：谨防网络虚假兼职网赚信息！客服热线：400-088-0725].

3. Elevator wiring:

If there is an elevator in the building wiring, the layer from which the cable enters the elevator should be based on the formula of F÷2+1 (F is the floor), and then calculate the actual number of floors before accessing.

* * * * * *

LIV is a professional data center to set up a company, with a group of professional team intimate attention to customer requirements, and provide quality services.

For more information about 'How to estimate the cable length when wiring?'，please visit : [微同城信息网提醒：谨防网络虚假兼职网赚信息！客服热线：400-088-0725]livservices.com.hk

Address: Unit 4, 4/F., Hung Tai Industrial Building,37-39 Hung To Road, Kwun Tong, Hong Kong

Tel: +852 3106 3235